Planet-technology XRT-104D Manual do Utilizador Página 1

1 Internet Broadband Router XRT-402D/104D User’s Manual

5 8: Reboot the PC. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server. ?Note: Please make sure th

6 5: Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP

7 6: Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP

8 6: Check each of the tabs and verify the following settings: • IP Address: Select Obtain an IP address from a DHCP server. • DNS: Let all fields

9 4) Once your PC has obtained an IP address from your router, enter the default IP address (broadband router’s IP address 192.168.0.1) into your PC’

10 Menu Description Quick Setup Wizard (Chapter 2) Select your Internet connection type and then input the configurations needed to connect to

11 Chapter 2 Quick Setup The Quick Setup section is designed to get you using XRT-D as quickly as possible. In the Quick Setup you are required to fi

12 In this section you have to select one of many types of connections that you used to connect your broadband router to your ISP (see screen below).

13 2.1 Cable Modem Choose Cable Modem if your ISP will automatically give you an IP address. Some ISP may also require you to fill in additional info

14 2.2 Fixed-IP xDSL Select Static IP Address if your ISP has given you a specific IP address for you to use. Your ISP should provide all the inform

2 Copyright Copyright (C) 2005 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed p

15 2.3 PPPoE Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP should provide all the information requir

16 Internet) during this specified period, the router will automatically disconnect the connection with your ISP. Click <OK> when you have f

17 2.4 PPTP Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP should provide all the information required

18 PPTP Gateway If your LAN has a PPTP gateway, then enter that PPTP gateway IP address here. If you do not have a PPTP gateway then enter the ISP’s

19 2.5 L2TP Select L2TP if your ISP requires the L2TP protocol to connect you to the Internet. Your ISP should provide all the information required

20 Gateway Enter the IP address of the ISP Gateway. User ID Enter the User Name provided by your ISP for the L2TP connection. Sometimes named “Con

21 2.6 Telstra Big Pond Select Telstra Big Pond if your ISP requires the Telstra Big Pond protocol to connect you to the Internet. Your ISP should p

22 Chapter 3 General Settings Once you click on the General Setup button at the Home Page, you should see the screen below. If you have already conf

23 3.1 System The system screen allows you to specify a time zone, to change the system password and to specify a remote management user for XRT-D.

24 Parameter Description Set Time Zone Select the time zone of the country you are currently in. The router will set its time based on your selec

3 Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and software products by their tr

25 Confirmed Password Enter your new password again for verification purposes. Note: If you forget your password, you’ll have to reset the route

26 Enabled Select “Enabled” to enable the remote management function. Click <Save> at the bottom of the screen to save the above configurati

27 3.2.8 QoS You can specify rules for bandwidth control. 3.2.9 DNS You can specify a DNS server that you wish to use 3.2.10 DDNS You can s

28 3.2.7 WAN Policy The WAN policy for multi-homing can be setup here. You can setup policy for each WAN separately. The router will balance the lo

29 on start up. But when other enabled WAN ports fail, the backup WAN port will be activated and take over all the traffic. 3.2.8 QoS The QoS can l

30 Edit a QoS rule Select the rule you want to edit and click “Edit”, then you will enter the detail form of the QoS rule. Click “Save” after editin

31 Source IP Address Enter the source IP address range of the packets that this rule will apply to. If you assign 192.168.0.3 – 192.168.0.5, it means

32 Parameters Description Domain Name Server (DNS) Server This is the ISP’s DNS server IP address that they gave you; or you can specify your o

33 Parameters Default Description WAN Port Select the WAN port that you want to configure the DDNS for. Enable/Disable

34 Parameters Default Description LAN IP IP address 192.168.0.1 This is the router’s LAN port IP address. (Your

4 TABLE OF CONTENTS Chapter 1 Introduction...1 1.1 Features...

35 IP Address Pool You can select a particular IP address range for your DHCP server to issue IP addresses to your LAN Clients. Note: By default t

36 3.4.2 Virtual Server You can have different services (e.g. email, FTP, Web etc.) going to different service servers/clients in your LAN. The Virtu

37 Parameter Description Enable Port Forwarding Enable Port Forwarding Private IP This is the private IP of the server behind the NAT firewall.

38 Internet/WAN Port) to a particular LAN private IP address and its service port number. (See Glossary for an explanation on Port number) Paramet

39 this Virtual Server setting will be added into the "Current Virtual Server Table" below. If you find any typo before adding it and want

40 Trigger Type Select whether the outbound port protocol is “TCP”, “UDP” or both. Public Port Enter the In-coming (Inbound) port or port range fo

41 1 28800 UDP 2300-2400, 47624 TCP MSN Game Zone 2 6112 UDP 6112 UDP Battle.net In the example above, when a user trigger’s port 28800 (out

42 Click <Save> at the bottom of the screen to save the above configurations and press “Apply and Reboot” to apply the configuration and reboot

43 Destination Port Range Only packets with this assigned destination port range will statically bind to the assigned WAN

44 Parameters Default Description Enable You can select to enable “Application Layer Gateway” of an application and then the router will let tha

5 4.1 Status and Information...51 4.2 Internet Connection...

45 Click on one of the firewall selections and proceed to the manual’s relevant sub-section 3.5.1 Access Control If you want to restrict users from

46 and then click "Delete Selected". If you want remove all PCs from the table, just click "Delete All" button. If you want to cl

47 Note: You need to give your LAN PC clients a fixed/static IP address for the Access Control rule to work properly. Client PC Service You ca

48 and want to retype again, just click "Reset" and the field will be cleared. Remove URL / Keyword If you want to remove some URL keyword

49 Sync Flood Protection the router from Sync Flood attack. If you go to the advanced setting page, you can configure the threshold of the frequency

50 Public IP Address The IP address of the WAN port or any other Public IP addresses given to you by your ISP. The WAN port may use dynamic IP or st

51 Chapter 4 Status The Status section allows you to monitor the current status of your router. You can use the Status page to monitor: the connectio

52 Parameters Description Information You can see the router’s system information such as the router’s Hardware version, Serial Number, Boot code

53 Parameters Description Device Status This page shows XRT-D’s current device settings. This page displays XRT-D LAN port’s current LAN IP Add

54 4.5 Security Log View any attempts that have been made to illegally gain access to your network. Parameters Description Security Log This pag

1 Chapter 1 Introduction Thank you for purchasing Planet XRT-402D/104D (XRT-D router, in the following section). This Broadband router is a cost-effe

55 Parameters Description DHCP Client Log This page shows all DHCP clients (LAN PCs) currently connected to your network. The “Active DHCP Client

56 Chapter 5 Tools This page includes the basic configuration tools, such as Configuration Tools (save or restore configuration settings), Firmware U

57 Parameters Description Configuration Tools Use the "Backup" tool to save XRT-D current configuration to a file named "config.b

58 Once you’ve selected the new firmware file, click <Apply> at the bottom of the screen to start the upgrade process. (You may have to wa

59 Appendix A How to Manually find your PC’s IP and MAC address 1) In Window’s open the Command Prompt program 2) Type ipconfig /all and <ent

60 • Your PC’s IP address is the one entitled IP address (192.168.0.7) • The router’s IP address is the one entitled Default Gateway (192.168.0.1

61 Glossary Default Gateway (Router): Every non-router IP device needs to configure a default gateway’s IP address. When the device sends out an IP

62 ISP Gateway Address: (see ISP for definition). The ISP Gateway Address is an IP address for the Internet router located at the ISP's office.

63 Subnet Mask: A subnet mask, which may be a part of the TCP/IP information provided by your ISP, is a set of four numbers (e.g. 255.255.255.0) conf

2 Figure 1.0 XRT-402D Figure 1.1 XRT-104D 1) Local Area Network (LAN) XRT-D’s LAN ports are where you connect your LAN’s PCs, printer server

3 LED Light Status Description PWR ON Router’s power supply is on WAN 100 ON WAN port 100Mbps is connected Off WAN port 10Mbps is connected WAN L

4 2) You then need to set your LAN PC clients so that it can obtain an IP address automatically. All LAN clients require an IP address. Just like an