Planet Technology SGSW-24040R Manual do Utilizador

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1 User’s Manual WGSW-24040 / WGSW-24040R 24-Port 10/100/1000Mbps Layer 2

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 10Dot1x Statistics...

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 100The Managed Switch supports multiple VLAN tags and can therefore be used in MA

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 101untagged traffic will be dropped. • Ingress Filtering Enable ingress filterin

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1024.6.5 VLAN Membership Configuration  Adding Static Members to VLANs (VLAN In

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1034.6.6 Private VLAN Configuration Overview When a VLAN is configured to be a pr

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 104The page includes the following fields: Object Description • Port The switch

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1054.7 Rapid Spanning Tree Protocol The Spanning Tree protocol can be used to det

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 106uses the information in the frame to calculate a BPDU, and, if the topology ch

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 107SwitchBlockingListeningLearningForwardingDisable Figure 4-7-1 STP Port State T

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 108Priority A relative priority for each switch – lower numbers give a higher pr

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 109the Root Bridge, the set Hello Time will be used if and when your Switch becom

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 11Stack SID Swap...

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 110Bridge ID = 15Port 3Port 1Port 2ABridge ID = 20Port 1Port 2Port 3CBridge ID =

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1114.7.1 RSTP System Configuration This page allows you to configure RSTP system

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 112Compatible – Classis STP (802.1d): Provides a single path between end stations

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1134.7.3 RSTP Port Configuration This page allows the user to inspect the curre

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 114path cost ports are chosen as forwarding ports in favor of higher path cost po

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 115 Port Type Link Type IEEE 802.1w-2001 Ethernet Half Duplex Full Duple

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1164.7.4 RSTP Port Status This page displays the RSTP port status for port phys

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 117• State The current RSTP port state. The port state can be one of the followi

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 118 4.8 Quality of Service 4.8.1 Understand QOS Quality of Service (QoS) is a

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1193. Create a QoS profile which associates a service level and a classifier. 4.

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 121. INTRODUTION The PLANET Layer 2 Managed Gigabit Switch series - WGSW-24040 /

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 120• Type Value Indicates the value according to its QCE type. • Ethernet Typ

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 121The page includes the following fields: Object Description • QCE Type Select

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 122 Figure 4-8-3 Port QoS Configuration page screenshot The page includes the fo

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1234.8.4 QCL Configuration Wizard This handy wizard helps you set up a QCL quic

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 124 Figure 4-8-6 Set up Policy Rules page screenshot The page includes the folli

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1254.8.4.2 Set up Typical Network Application Rules Set up the specific QCL fo

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 126• User Definition Indicates the user definition that applies to the specific

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1274.8.4.3 Set up ToS Precedence Mapping Set up the traffic class mapping to t

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1284.8.4.4 Set up VLAN Tag Priority Mapping Set up the traffic class mapping t

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1294.8.5 QoS Statistics This page provides statistics for the different queues

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 13QoS and Network Security features make it to meets the needs of effective data

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1304.8.6 Bandwidth Control Configure the switch port rate limit for Policers an

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1314.8.7 Storm Control Configuration Storm control for the switch is configured

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1324.9 Multicast 4.9.1 IGMP Snooping The Internet Group Management Protocol (IGMP

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 133 Figure 4-9-2 Multicast flooding Figure 4-9-3 IGMP Snooping multicast stream

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 134IGMP Versions 1 and 2 Multicast groups allow members to join or leave at any t

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 135message, and query messages that are specific to a given group. The states a c

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1364.9.2 IGMP Snooping Configuration This page provides IGMP Snooping related con

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1374.9.3 IGMP Port Related Configuration This page provides IGMP Snooping related

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1384.9.4 IGMP Snooping Status This page provides IGMP Snooping status. The stat

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1394.9.5 Multicast Address Table The Multicast Address Table screen in Figure 4-9

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 14Reliability Stacking Management The SGSW Series Managed Switch provides a swi

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1404.10 IEEE 802.1X Network Access Control Overview of 802.1X (Port-Based) Authe

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1414.10.1 Understanding IEEE 802.1X Port-Based Authentication The IEEE 802.1X sta

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 142z Switch (802.1X device)—controls the physical access to the network based on

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 143 Figure 4-10-2 EAP message exchange  Ports in Authorized and Unauthorized S

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1444.10.2 802.1X System Configuration This page allows you to configure the IEEE

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 145• Reauthentication Enabled If checked, clients are reauthenticated after the

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1464.10.3 802.1X and MAC-Based Authentication Port Configuration When 802.1X is e

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 147• Port The port number for which the configuration below applies. • Admin St

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 148The stackswitch is "born" with a pool of state-machines, from which

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1494.10.4 802.1X Port Status This page provides an overview of the current IEEE 8

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 151.4 Product Features ¾ Physical Port WGSW-24040 / WGSW-24040R  24-Port

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 150EAPOL frame for port-based authentication, and the source MAC address from the

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 151The selected port belongs to the currently selected stack unit as reflected by

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 152 RADIUS Counters RADIUS Server frame counter statistics. For MAC-based por

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 153MAC-based: Counts all the RADIUS packets sent from the switch towardsthe RADIU

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1544.10.6 Windows Platform RADIUS Server Configuration 1. Setup the RADIUS serve

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 155 Figure 4-10-9 Windows Server RADIUS Server setting path 5. Enter ” Active Dir

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 156 Set the Ports Authenticate Status to “Force Authorized” if the port is connec

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 157 Figure 4-10-12 7. Click “OK”. 8. When client has associated with the Managed

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1589. Enter the user name, password and the logon domain that your account belon

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1594.11 Access Control Lists ACL is an acronym for Access Control List. It is the

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 16 ¾ Quality of Service  4 priority queues on all switch ports.  Supports fo

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 160• Policy: The ACE will match ingress ports with a specific policy. • Port: T

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1614.11.2 ACE Configuration Configure an ACE (Access Control Entry) on this page.

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 162  MAC Parameters Object Description • SMAC Filter (Only displayed when the

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 163 ARP Parameters The ARP parameters can be configured when Frame Type "A

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 164address field (THA) settings. 0: RARP frames where THA is not equal to the S

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 165TCP parameters will appear. These fields are explained later in this help file

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 166address and destination IP mask in the DIP Address and DIP Mask fields that ap

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 167hits this ACE matches this TCP/UDP source value. • TCP/UDP Source Range When

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 168  Ethernet Type Parameters The Ethernet Type parameters can be configured wh

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 169The page includes the following fields: Object Description • Set up Policy R

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 171.5 Product Specification Product WGSW-24040 WGSW-24040R SGSW-24040 SGSW-

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1704.11.3.2 Set up Port Policies Group ports into several types according to d

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1714.11.3.3 Set up Typical Network Application Rules Set up the specific ACL f

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 172range is 0 to 65535. • Others Indicates the other application that applies to

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 173through 8. • Switch Select the switch to which this ACE applies. • Any: Th

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1744.11.3.4 Set up Source MAC and Source IP Binding Strictly control the netwo

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 175 Figure 4-11-9 4.11.3.5 Set up DoS Attack Detection Rules Set up the specif

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 176packet of destination unreachable to the spoofed source address. Eventually le

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 177Object Description • Ingress Port Select the ingress port to which this ACE

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1784.11.4 ACL Rate Limiter Configuration Configure the rate limiter for the ACL o

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1794.11.5 ACL Ports Configuration Configure the ACL parameters (ACE) of each swit

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 18Port trunking IEEE 802.3ad LACP / Static Trunk Support 8 groups of 8-Port tru

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 180• Policy ID Select the policy to apply to this port. The allowed values are 1

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1814.12 Address Table Switching of frames is based upon the DMAC address containe

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1824.12.2 Static MAC Table Configuration The static entries in the MAC table are

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1834.12.3 MAC Address Table Status Dynamic MAC Table Entries in the MAC Table are

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 184Buttons Auto-refresh □ : Check this box to enable an automatic refresh of t

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1854.13 Port Security (To be Continued) Port security is a feature that allows yo

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 186 Make sure that the link used for managing the switch is added to the Static M

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1874.14 LLDP 4.14.1 Link Layer Discovery Protocol Link Layer Discovery Protocol

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1884.14.2 LLDP Configuration This page allows the user to inspect and configure t

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 189This attribute must comply with the following rule: (Transmission Interval * H

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 192. INSTALLATION This section describes the hardware features and installation o

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 190• Port Descr Optional TLV: When checked the "port description" is i

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1914.14.3 LLDP Neighbor This page provides a status overview for all LLDP neighbo

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1924.14.4 LLDP Statistics This page provides an overview of all LLDP traffic. Two

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 193• Total Neighbors Entries Dropped Shows the number of LLDP frames dropped due

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1944.15 Network Diagnastics 4.15.1 Cable Diagnostics This page is used for runnin

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1954.15.2 Ping This page allows you to issue ICMP PING packets to troubleshoot IP

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1964.16 Stacking – SGSW-24040 / SGSW-24040R Using Stacking, it is possible to co

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 197 Chain Stack: A chain of switches, that is, no redundant forwarding paths.

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1984.16.1 Stack This section provides information for understand stacking archi

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 199"Save". 5. The new hardware has now taken over the configuration o

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2Trademarks Copyright © PLANET Technology Corp. 2008. Contents subject to which r

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 20 Reset button At the left of front panel, the reset button is designed for re

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 200 Figure 4-16-4 Remove or Replace a switch from the stack 4.16.1.4 Shortest P

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2014.16.2 Stack Configuration This page is used for configure the stack, include

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2024.16.3 Stack Information This page provides an overview of the stack topology,

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 203Figure 4-16-8 Stack Information page screenshot - Stack List The page include

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 204 Figure 4-16-9 Stack Information page screenshot - Master Forwarding Table 4

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2054.16.5 Stack Example Stacking function is convenient for administrator to mana

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 206 Figure 4-16-12 Stack Configuration Step 5: We wish to make the SGSW switch

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 207 Reflash the web browser, the switch with MAC address “00-30-4f-24-04-76” be

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2085. COMMAND LINE INTERFACE 5.1 Accessing the CLI When accessing the managemen

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 209 1. For security reason, please change and memorize the new password after th

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 212.1.2 LED Indications The front panel LEDs indicates instant status of port lin

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 210Switch/> ip setup 192.168.1.100 255.255.255.0 192.168.1.1 The previous comm

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2115.2 Telnet login The Managed Switch also supports telnet for remote management

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2126. Command Line Mode The CLI groups all the commands in appropriate modes acco

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 213all : Show all switch configuration, default: Show system configuration

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 214 Parameters: keep_ip: Keep IP configuration, default: Restore full configurati

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 215Parameters: <prompt>: CLI prompt string Default Setting: SWITCH Exampl

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 216Parameters: <ip_addr>: IP address (a.b.c.d), default: Show IP address D

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 217<ip_server>: TFTP server IP address (a.b.c.d) <file_name>: Firmwar

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 218 IP Configuration Description: Show IP configuration. Syntax: IP Configuratio

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 219 IP Setup Description: Set or show the IP setup. Syntax: IP Setup [<ip_add

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 22 1000Base-SX/LX SFP interfaces (Shared Port-21~Port-24) LED Color Function

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 220SWITCH/>ip ping 192.168.0.51 PING server 192.168.0.51 60 bytes from 192.168

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2216.2 Port Management Command Port Configuration Description: Show port config

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 222 Default Setting: Enable Example: Disable port1 SWITCH/>port state 1 disa

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 223 Syntax: Port Flow Control [<port_list>] [enable|disable] Parameters: &

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 224 Port Power Description: Set or show the port PHY power mode. Syntax: Port Po

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 225 Example: SWITCH/>port excessive 1 restart Port Statistics Description:

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 226 Port Numbers Description: Show port numbering. Syntax: Port Numbers

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 227 Mirror Configuration Description: Show mirror configuration. Syntax: Mirror

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 228Default Setting: 1 Example: Set mirror SID 2 for switch SWITCH/>mirror

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2296.3 Link Aggregation Command Aggregation Configuration Description: Show link

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 23Lights: To indicate the link through that port is successfully established with

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 230Aggregation Delete Description: Delete link aggregation. Syntax: Aggr Delete

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 231Aggregation Mode Description: Set or show the link aggregation traffic distrib

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 232 LACP Configuration Description: Show LACP configuration. Syntax: LACP Confi

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 23321 Disabled Auto Active 22 Disabled Auto Active 23 Disabled Auto

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 234 Default Setting: Auto Example: Set key1 for port1~4 SWITCH/>lacp key 1

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 235 Parameters: <port_list>: Port list or 'all', default: All por

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 236

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2376.4 VLAN Configuration Command VLAN Configuration Description: Show VLAN confi

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 238Dot1q Example: Set VLAN mode in port base SWITCH/>vlan mode portbased

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 239(default: Show accepted frame types) Default Setting: All Example: Set po

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 24 SGSW-24040 Rear Panel Figure 2-7 Rear panel of SGSW-24040 SGSW-24040R R

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 240 Parameters: <port_list>: Port list or 'all', default: All por

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 241dot1q : Set out layer VLAN tag ether type : 802.1Q Default Set

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 242<vid>: VLAN ID (1-4095) Example: Delete port17 to port24 in VLAN10 S

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 243 PVLAN Configuration Description: Show Private VLAN configuration. Syntax: PV

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2446.5 Spanning Tree Protocol Command RSTP Configuration Description: Show RSTP c

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 245Default Setting: 32768 Example: Set RSTP system priority value in 4096 SWI

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 24615 Example: Set RSTP forward delay value in 25 SWITCH/>rstp delay 25

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 247 Default Setting: Disable Example: Enable rstp mode for port1 SWITCH/>r

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 248<priority> : RSTP priority (0/16/32/48/.../224/240) Default Setting: 12

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 249Parameters: <port_list>: Port list or 'all', default: All port

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 25 Figure 2-9 SGSW-24040 / SGSW-24040R Stack Ports DC Power Connector The re

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 250 RSTP Statistics Description: Show RSTP statistics. Syntax: RSTP Statistics

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2516.6 Multicast Configuration Command IGMP Configuration Description: Show IGMP

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 252 Enable IGMP mode SWITCH/>igmp mode enable IGMP State Description: Set o

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 253disable: Disable IGMP snooping (default: Show IGMP snooping mode) Default Set

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 254IGMP Fastleave [<port_list>] [enable|disable] Parameters: <port_list

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 255IGMP Flooding Description: Set or show the IGMP snooping unregistered flood op

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 256 Parameters: <vid>: VLAN ID (1-4095) Default Setting: Disable Example:

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2576.7 Quality of Service Command QoS Configuration Description: Show QoS Configu

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 258 Parameters: <port_list>: Port list or 'all', default: All por

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 259QoS QCL Port [<port_list>] [<qcl_id>] Parameters: <port_list&g

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 262.2 Install the Switch This section describes how to install your Managed Switc

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 260<etype> : Ethernet Type vid : VLAN ID keyword <vid&

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 261QoS Mode Description: Set or show the port egress scheduler mode. Syntax: QoS

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 262 Syntax: QoS Rate Limiter [<port_list>] [enable|disable] [<bit_rate&g

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 263SWITCH/>qos shaper 9-16 enable 1000 QoS Unicast Description: Set or show

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 264 Example: Enable multicast storm rate limiter in 1kpps SWITCH/>qos storm

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2656.8 802.1x Port Access Control Command Dot1x Configuration Description: Show 8

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 266disable: Disable 802.1X (default: Show 802.1X mode) Default Setting: Disable

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 267 Syntax: Dot1x Server [<ip_addr>] Parameters: ip_addr: RADIUS server IP

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 268Refresh (restart) 802.1X authentication process. Syntax: Dot1x Authenticate [

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 269<reauth_period>: Period between reauthentications (1-3600 seconds) (defa

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 27Step5: Supply power to the Managed Switch. Connect one end of the power cable t

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 270Parameters: <port_list>: Port list or 'all', default: All port

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 271300 Example: Set age time in 100 seconds SWITCH/>dot1x agetime 100 Do

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2726.9 Access Control List Command ACL Configuration Description: Show ACL Config

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 273Rate Limiter: Disable Port Copy: Disable Loading: Disable Shut down: Disable

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 274<rate_limiter_list>: Rate limiter list (1-15), default: All rate limiter

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 275<smac> : Source MAC address (xx-xx-xx-xx-xx-xx) or 'any&apos

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 276ACL Lookup Description: Show ACE, default: All ACEs. Syntax: ACL Lookup [<

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2776.10 MAC Address Table Command MAC Configuration Description: Show MAC address

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 278Example: Add Mac address 00-30-4F-01-01-02 in port1 and vid1 SWITCH/>mac

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 279MAC Age Time Description: Set or show the MAC address age timer. Syntax: MAC

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 28 Figure 2-12 Mounting SGSW-2840 in a Rack Step6: Proceeds with the steps 4 and

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 280SWITCH/>mac learning 1 secure MAC Dump Description: Show sorted list of M

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 281MAC Flash Description: Flush all learned entries. Syntax: MAC Flush

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2826.11 LLDP Command LLDP Configuration Description: Show LLDP configuration. Sy

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 283LLDP Optional TLV Description: Show / Set LLDP Optional TLVs. Syntax: LLDP Op

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 284Parameters: <interval>: LLDP transmission interval (5-32768) Default Se

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 285<delay>: LLDP transmission delay (1-8192) Default Setting: 2 Example:

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 286 LLDP Statistics Description: Show LLDP Statistics. Syntax: LLDP Statistics

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2876.12 Stack Management Command Stack List Description: Show the list of switche

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 288 Stack Select Description: Set or show the selected switch ID. Syntax: Stack

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 289Stack SID Delete <sid> Parameters: <sid>: Switch ID (1-16) Stac

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 29 Approved PLANET SFP Transceivers PLANET Managed Switch supports both Single

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2907. SWITCH OPERATION 7.1 Address Table The Switch is implemented with an addres

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2917.5 Auto-Negotiation The STP ports on the Switch have built-in "Auto-nego

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 292

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 2938. TROUBLE SHOOTING This chapter contains information to help you solve proble

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 294 Stacking not functioning Solution: 1. Check that modules are installed cor

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 295APPENDEX A A.1 Switch's RJ-45 Pin Assignments 1000Mbps, 1000Base T Contac

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 296 The standard cable, RJ-45 pin assignment The standard RJ-45 receptacle/con

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 297APPENDEX B : GLOSSARY A ACE ACE is an acronym for Access Control Entry. It

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 298D DES DES is an acronym for Data Encryption Standard. It provides a complet

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 299DSCP DSCP is an acronym for Differentiated Services Code Point. It is a fiel

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 3TABLE OF CONETNTS 1. INTRODUTION ...

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 30 Figure 2-14 Pull out the SFP transceiver Never pull out the module without

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 300connection. HTTPS provide authentication and encrypted communication and is w

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 301The current version of the Internet Message Access Protocol is IMAP4. It is si

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 302The frames also contain a MAC address ( SMAC address ), which shows the MAC ad

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 303optional TLVs. If an optional TLVs is disabled the corresponding information i

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 304There are six QCE frame types: Ethernet Type, VLAN, UDP/TCP Port, DSCP, TOS, a

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 305which is the underlying protocol used in Microsoft Windows networking. Samba

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 306T Tag Priority Tag Priority is a 3-bit field storing the priority level for

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 307A LLDP frame can contain multiple pieces of information. Each of these pieces

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 308forwarded to the provider port with a single VLAN tag. Tagged frames received

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 312.2.4 Connecting DC Power Supply – WGSW-24040R / SGSW-24040R The WGSW-24040R an

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 322.3 Stack Installation SGSW-24040 / SGSW-24040R The SGSW-24040 series Managed

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 332.3.1 Connecting Stacking cable Before attempting to connect stacking ports, ve

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 34STEP-5: Once the stack start operation, the Stack master be automatically elect

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 35 1. The stack switch with least priority ID or MAC Address number will become

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 363. SWITCH MANAGEMENT This chapter explains the methods that you can use to conf

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 373.2 Management Access Overview The Managed Switch gives you the flexibility to

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 38 Figure 3-1 Console management Direct Access Direct access to the administra

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 393.4 Web Management The Managed Switch offers management features that allow use

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 44. WEB CONFIGURATION ...

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 403.5 SNMP-Based Network Management You can use an external SNMP-based applicat

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 412. Start the Telnet program on a PC and connect to the Managed Switch. The man

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 424. WEB CONFIGURATION This section introduces the configuration and functions of

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 43 Logging on the switch 1. Use Internet Explorer 6.0 or above Web browser. En

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 44 Figure 4-1-3 Default main page Now, you can use the Web management interface

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 454.1 Main WEB PAGE The WGSW / SGSW Managed Switch provides a Web-based browser i

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 46Main Menu Using the onboard web agent, you can define system parameters, mana

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 474.2 System Use the System menu items to display and configure basic administrat

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 484.2.1 System Information The System Info page provides information for the curr

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 49: Click to refresh the page; any changes made locally will be undone. For the

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 54.6 VLAN...

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 504.2.2 IP Configuration The IP Configuration includes the IP Address, Subnet Mas

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 51: Click to save changes. : Click to undo any changes made locally and revert to

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 524.2.4 SNTP Configuration In the System sub-function menu, you can see the SNTP

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 53 It is recommended that you research any time server selection to ensure that i

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 54 4.2.6 TFTP Firmware Upgrade The Firmware Upgrade page provides the functions t

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 55Figure 4-2-8 TFTP Firmware upgrade pop-up message Figure 4-2-9 Firmware Upgra

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 564.2.7 Configuration Save This function allows backup and reload the current con

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 57 Figure 4-2-12 File save screen 4.2.8 Configuration Upload This function all

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 58 Figure 4-2-14 Windows file selection menu popup 2. Select on the configuratio

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 594.2.9 Factory Default The Factory Reset button can reset the VDSL2 Switch back

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 64.10.5 802.1X and MAC-Based Authentication Statistics ...

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 604.2.10 System Reboot The Reboot page enables the device to be rebooted from a r

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 61 Example 1: Save Current Configuration setting To save all applied changes

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 62  Example 2: Downloading System Software from a Server When downloading run

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 63• If you download to a new destination file, go to the System / File / Set Sta

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 64configuration file. To use the new settings, reboot the system via the System /

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 654.3 Simple Network Management Protocol 4.3.1 SNMP Overview The Simple Network M

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 66The SNMP System Configuration screen in Figure 4-3-1 appears. Figure 4-3-1 SN

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 674.3.3 SNMP System Information Configuration The switch system information is pr

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 68 Figure 4-3-3 SNMP Trap Configuration page screenshot The page includes the fo

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 69• Trap Probe Security Engine ID Indicates the SNMP trap probe security engine

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 74.16.4 Stack Port State Ovewview...

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 70to 126. • Security Model Indicates the security model that this entry should b

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 71• Community Indicates the community access string to permit access to SNMPv3 a

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 72characters from 33 to 126. 4.3.5.4 SNMPv3 Users Configuration Configure SNM

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 73protocol. • SHA: An optional flag to indicate that this user using SHA authen

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 74• View Type Indicates the view type that this entry should belong to. Possible

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 75 Figure 4-3-9 SNMPv3 Users-NEW page screenshot Once the new SNMPv3 user be suc

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 76 Figure 4-3-11 SNMPv3 Groups-NEW page screenshot

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 774.4 Port Management Use the Port Menu to display or configure the Managed Switc

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 78The page includes the following fields: Object Description • Port This is the

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 79• Enabled: Link up and link down power savings enabled. • Total Power Usage T

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 8Mirror Mode ...

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 80The displayed counters are: Object Description • Port The logical port for th

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 81The page includes the following fields: Receive Total and Transmit Total Object

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 82Transmit Error Counters Object Description • Tx Drops The number of frames dr

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 83Mirror Port Configuration The Port Mirror Configuration screen in Figure 4-4-5

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 84 SGSW Stackable Switch The SGSW Stackable switch supports port mirror funct

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 854.5 Link Aggregation Port Aggregation optimizes port usage by linking a group o

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 86The Link Aggregation Control Protocol (LACP) provides a standardized means for

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 874.5.1 Static Aggregation Configuration This page is used to configure the Aggre

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 88Figure 4-5-3 Aggregation Group Configuration page screenshot The page includes

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 894.5.2 LACP Configuration Link Aggregation Control Protocol (LACP) - LACP LAG ne

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 9RSTP Statistics...

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 90each second, while Passive will wait for a LACP packet from a partner (speak if

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 91 Figure 4-5-6 LACP Port Status page screenshot The page includes the following

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 924.5.5 LACP statistics This page provides an overview for LACP statistics for al

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 934.6 VLAN 4.6.1 VLAN Overview A Virtual Local Area Network (VLAN) is a network t

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 944.6.2 IEEE 802.1Q VLAN In large networks, routers are used to isolate broadca

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 95ports and work normally. Any port can be configured as either tagging or untagg

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 96Adding an IEEE802.1Q Tag Dest. Addr. Src. Addr. Length/E. type Data Old CRC

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 97VLANs, and any intermediate network devices or the host at the other end of the

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 984.6.3 VLAN Basic Information The VLAN Basic Information page displays basic inf

User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 994.6.4 VLAN Port Configuration This page is used for configuring the Managed S