Planet Technology WDAP-2000PE Manual do Utilizador descarregar pdf (Página 33)

Chapter 4

PC and Server Configuration

4.1 Overview

All Wireless Stations need to have settings which match the Wireless Access Point.

These settings depend on the mode in which the WDAP-2000PE is being used.

• If using WEP or WPA-PSK, it is only necessary to ensure that each Wireless

station's settings match those of the WDAP-2000PE, as described below.

• For WPA and 802.1x modes, configuration is much more complex. The Radius

Server must be configured correctly, and setup of each Wireless station is also

more complex.

4.2 Using WEP

For each of the following items, each Wireless Station must have the same settings as

the WDAP-2000PE.

Mode On each PC, the mode must be set to Infrastructure.

SSID (ESSID)

This must match the value used on the WDAP-2000PE.

The default value is default

Note: The SSID is case sensitive.

Wireless

Security

• Each Wireless station must be set to use WEP data encryp-

tion.

• The Key size (64 bit, 128 bit, 152 bit) must be set to match the

WDAP-2000PE.

• The keys values on the PC must match the key values on the

WDAP-2000PE.

Note:

On some systems, the key sizes may be shown as 40bit, 104bit,

and 128bit instead of 64 bit, 128 bit and 152bit. This difference

arises because the key input by the user is 24 bits less than the

key size used for encryption.

4.3 Using WPA-PSK

For each of the following items, each Wireless Station must have the same settings as

the WDAP-2000PE.

Mode On each PC, the mode must be set to Infrastructure.

SSID (ESSID)

This must match the value used on the WDAP-2000PE.

The default value is default

Note: The SSID is case sensitive.

Wireless

On each client, Wireless security must be set to WPA-PSK.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 52 53

Sem comentários

Planet Technology WDAP-2000PE Manual do Utilizador Página 33