Planet-technology IP DSLAM IDL-4801 Manual do Utilizador Página 182

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 707
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 181
IDL series User Guide
182
Output Fields:
Field Description
PortId
This is the bridge port identifier. It can be : 1- 386
Max Info Size
The maximum size of the INFO (non-MAC) field that this port will
receive or transmit.
Out Frames
The number of frames that have been transmitted by this port to its
segment.
In Frames
The number of frames that have been received by this port from its
segment.
In Discards
Count of valid frames received, which were discarded (i.e., filtered)
by the Forwarding Process.
HC In Frames
Number of frames that have been received by this port from its
segment. This is valid only for Ethernet interfaces.
HC Out Frames
Number of frames that have been transmitted by this port to its
segment. This is valid only for Ethernet interfaces.
HC In Discards
Count of valid frames received and discarded (i.e filtered) by the
Forwarding Process. This is valid only for Ethernet interfaces.
5.6.7 Bridge Port Table Commands
5.6.7.1 Create bridge port intf
Description:
Use this command to create a new bridge port.
Command Syntax:
create bridge port intf portid <portid-val> ifname <interface-name> [maxucast
<max-ucast-addresses> ] [learning enable|disable][status enable|disable]
[stickystatus enable | disable] [FdbModify enable | disable][ aclglbdenyapply
Enable | Disable ] [ aclglbtrackapply Enable | Disable ] [ proxyarpstatus enable |
disable ] [ arptstatus Enable | Disable ] [ darpstatus Enable | Disable ] [ porttype
trusted | untrusted ]
5.6.7.2 Delete bridge port intf
Description:
This command is used to delete an existing bridge port.
Command Syntax:
delete bridge port intf portid <portid-val>
Vista de página 181
1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 706 707

Comentários a estes Manuais

Sem comentários