Planet-technology IP DSLAM IDL-4801 Manual do Utilizador Página 286

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 707
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 285
IDL series User Guide
286
Type: Modify -- Optional
atucgsbitswap Disable |
Enable
This parameter enables/disables bit swapping
Type: Modify -- Optional
atucgsntr LocalOcs |
Refck8K
This parameter enables/disables NTR on a per chip basis
Type: Modify -- Optional
atucgsalctlusver Unknown
For T1.413 demo purposes only
Type: Modify -- Optional
atucgsusecustombin Enable
| Disable
This parameter enables/disables user selection which of the 511 bins
will be enabled for upstream and downstream transmission.
Type: Modify -- Optional
atucgsdnbinusage
<atucgsdnbinusage-val>
'1' in bit position indicates usage of corresponding bin,whereas a '0'
disables usage of corresponding bin.
Type: Modify -- Optional
atucgsmaxdco 64 | 128 | 256
| 511
Maximum interleaving depth supported by the customer's hardware
Type: Modify -- Optional
atucgsfullretrain Enable |
Disable
Indicates enable/disable of auto retrain capability
Type: Modify -- Optional
atucgspsdmasktype
CoMsk2 | FlatMsk | CabMsk2
| CoMsk2Rfi | FlatMskRfi |
CabMsk2Rfi | CoMsk2Rfi0 |
Adsl2NonovlpM1 |
Adsl2NonovlpM2 |
Adsl2NonovlpFlat
This parameter selects the PSD mask option to be used
Type: Modify -- Optional
atucgseraseprofs enable |
disable
This parameter enables/disables the ability to erase all fast retrain
profiles at startup
Type: Modify -- Optional
atucgsextrsmemory
notpresent | present
Indicates whether customer's Hardware uses external RS RAM
Type: Modify -- Optional
paramhybridlossteststart
<paramhybridlossteststart-val
>
Start bin for range of bins to be measured. The default value mentioned
is an indicative value only, for exact value refer to document number
DO-400523-AN and DO-401163-AN.
Type: Modify -- Optional
Valid values: 0x0 - 0x1ff
paramhybridlosstestend
<paramhybridlosstestend-val
>
End bin for range of bins to be measured.
Type: Modify -- Optional
Valid values: 0x0 - 0x1ff
dmttrellis on | off
This parameter enables/disables trellis coding. Trellis coding should
always be enabled for its clear performance advantage.
Type: Modify -- Optional
Vista de página 285
1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 706 707

Comentários a estes Manuais

Sem comentários